Home › Forum Topics › General Symptoms › Could our grinding wheel affect blade sharpening?

  • Creator
    Post
  • #141890 Reply
    Leylla MartinsLeylla Martins
    Participant

      My dad and I run a small metalworking shop, and we’ve been having trouble getting consistent results when sharpening our HSS cold saw blades. Some blades cut fine afterward, while others seem to lose their edge much sooner. We’ve also noticed more heat during grinding than we’d like. We’re using a conventional abrasive wheel, and I’m wondering whether that’s contributing to the problem or whether we should be looking at the machine settings first. What would you check before buying a different wheel?

    Viewing 1 reply thread
    • Author
      Replies
      • #141893 Reply
        Pamella DohertyPamella Doherty
        Participant

          I’d start with the wheel you’re already using and the way the machine is set up. A glazed or poorly dressed surface can create extra heat, and an aggressive feed or weak coolant flow can make it worse. Look at the teeth after grinding for discoloration and make sure the same geometry is being held all the way around the blade. If some teeth are getting hotter or coming out at a different angle, the wheel itself may not be the only problem.

        • #141894 Reply
          Tiffany HeilyTiffany Heily
          Participant

            Machine settings are worth sorting out first, but the abrasive matters too when you’re sharpening HSS blades regularly. CBN holds its profile well on hardened steels, so it can be a better fit when consistency from blade to blade matters. Have a look at these CBN grinding wheels: https://coldsawbladestore.com/product-category/cbn-grinding-wheels/ . Match the bore, outside diameter, and wheel profile to your sharpener before ordering. Also confirm the allowed RPM and coolant requirements so the new wheel is actually suited to the way your machine runs.

        Viewing 1 reply thread
        Reply To: Could our grinding wheel affect blade sharpening?
        Your information: